See Saw Rubber Skin
Don't feel like making your own surface out of rubber granules? In that case, you can purchase Max 200 pre-made rubber skins that are ready to apply to your seesaw. All you'll need to do is glue the surface sections to your seesaw using contact cement, and then trim the edges of the surface for a perfect fit.
*These rubber skins are designed for a standard Seesaw plank that is 12" wide and 12' long.
*You will get 2 rubber skins that 12" wide and 6' long. These skins will add about 16 lbs. to your Seesaw.
*The contact zones can be 36" or 42"
*The contact zones will be yellow rubber
This surfacing conforms to AAC, AKC, ASCA, CPE, NADAC, UKI, and USDAA regulations. The surface material is very stable in all kinds of weather, and there is no shedding of granules. In fact, the granules are bound together so well that you can clean the surface by scrubbing it with a brush or power washing it.
You can select from 4 colors.
If you are ordering a surface for a contact obstacle, the sections for the ramps will be made from that color, and the contact sections will be made from yellow granules.
||Rubber Skin for See Saw 36" (Wet-Pour Method-Granulated Skin)
||Rubber Skin for See Saw 42" (Wet-Pour Method-Granulated Skin)
If you are not sure which rubber skin to order, please CALL 1-800-446-2920 for more information:
You should be aware that not all rubber granules are created equal. Different suppliers have granules that vary in size, quality, and amount of dust. These surfaces are made from 1-4mm TPV granules, a virgin rubber material produced from a high-grade polymer. American Recycling's TPV granules are known for their color consistency, resiliency, and high UV stability, and also for being 98% dust-free because of the high standards they require in their packaging. They are safe for use in playground surfaces and they are commonly used to create impact-absorbing rubberized sports surfaces.
Please allow 10-12 weeks for delivery